Shanghai Xinyu Packaging Machinery Co., Ltd.
Good Quality,Good Faith,Good Service
Add to Cart
The material is sprayed into exiguity fog by nozzle on the top of tower. Follow the heat wind, the material is dried. The machine's charateristic is high collect drit, no past, economization energy, high efficent, and wide used in food, dyestuff, chemical industry and so on.
1. The dry speed is fast. The surface area of raw material liquid after atomized will be increased greatly, 95-98% of moisture can be evaporated at moment. The time to finish dry needs about ten seconds to several tens seconds. It is suitable for drying thermal sensitivity material particularly.
2. The finished products is ball granule with uniform size. Its fluidity and solubility are good. The purity of product is high and its quality is good.
3. The applied scope is wide. According to the characteristics of raw material, it can use hot air to dry and can also use cool air to granule. It has strong adaptability to raw materials.
4. Its operation is simple and stable and its control is simple and convenient and is easy to realize automatic operation.
Granulating through atomizing dry:
Chemical industry: organic catalyst, resin, synthetic washing powder, oils, thiamin, dyestuff, intermediate of dyestuff, white carbon black, graphite, ammonium phosphate and so on.
Foodstuff: amino acids and similar substances, flavoring, protein, starch, dairy products, extractive substance from coffee, fish powder, extractive substance from meat and so on.
Pharmaceutical: Chinese patent medicines,
Granulating through atomizing:
all kinds of fertilizer, aluminum oxide, ceramics powder, pharmaceutical, heavy metallic super hardness steel, chemical fertilizer, washing powder, Chinese patent medicines and so on.
| spec | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
| Water evaporation capacity Kg/h | 50 | 100 | 150 | 200 | 300 | 500 | 1000 |
| Overall dimensionmm | 1600×8900 | 2000×11500 | 2400×13500 | 2800×14800 | 3200×15400 | 3800×18800 | 4600×22500 |
| High-pressure pump pressure Mpa | 2-10 | ||||||
| Power Kw | 8.5 | 14 | 22 | 24 | 30 | 82 | 30 |
| Inlet air temperature °C | 300-350 | ||||||
| product water contents % | less than 5 percent, and 5 percent can be achieved. | ||||||
| collection rate % | >97 | ||||||
| electric heater Kw | 75 | 120 | 150 | When the temperature is lower then 200, the parameters should be calculated according to the practical condition. | |||
| electricity + steam Mpa+Kw | 0.5+54 | 0.6+90 | 0.6+108 | ||||
| hot air furnace Kcal/h | 100000 | 150000 | 200000 | 300000 | 400000 | 500000 | 1200000 |